Storing Only The Desired Stations; Receiving The Stored Stations; If Fm Stereo Reception Is Poor - Monaural Mode - Sony CDX-MP30 Manual De Instrucciones

Ocultar thumbs Ver también para CDX-MP30:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Storing only the desired
stations
You can manually preset the desired stations
on any chosen number button.
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the
band.
3
Turn the SEEK/AMS control dial to tune
in the station that you want to store.
4
Press the desired number button ((1) to
(6)) until "MEM" appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the stored
stations
1
Press (SOURCE) repeatedly to select the
radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
16
If preset tuning does not work
— Automatic tuning/Local Seek Mode
Automatic tuning:
Turn the SEEK/AMS control dial to search
for the station.
Scanning stops when the unit receives a
station. Turn the SEEK/AMS control dial
until the desired station is received.
Local Seek Mode:
If the automatic tuning stops too
frequently, press (SENS/BTM) repeatedly
until "LOCAL-ON" appears.
"LCL" indicator is displayed.
Only the stations with relatively strong
signals will be tuned in.
Tip
If you know the frequency of the station you want
to listen to, turn the SEEK/AMS control dial until
the desired frequency appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
During radio reception, press (SENS/BTM)
repeatedly until "MONO-ON" appears.
"MONO" indicator is displayed.
The sound improves, but becomes
monaural ("ST" disappears).
To return to normal mode, select "MONO-
OFF."

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido