Data Input - Soehnle Body Balance Comfort F5 Instrucciones De Manejo

GB
4.
1.
2.
3.
4.
5.
22
4. Option to change country-specific settings
between kg/cm and lb/in or st/in.
Depending on the choice of unit of weight,
you can switch back to the clock mode
with the key.
The operator terminal and the scales
are in radio contact.
Radio-aided computer components, HIFI
components or radio-control-led toys may
cause an operational error (see error mes-
sages).

Data input

To use the Soehnle Body Balance correctly,
the personal data for each person need to be
input into the operator terminal and you
should then immediately step on the scales
barefoot.
If weight is placed on the scales during input,
then they immediately switch – as long as
there is radio contact between the operator
terminal and the scales – to the weighing and
analysis mode and they cannot be used again
until the scales have switched back to the
clock mode (20 sec. after the weight is remo-
ved from the scales).
1. Start data input (
If anyone's data is already stored, you must
select the "NEW" display with the ▼/▲
keys and confirm with (
2. Select memory (P1 ... P8)
(▼ = down, ▲ = up) and confirm (
3. Input height (▼ = down, ▲ = up) and
confirm ( ).
4. Input age (▼ = down, ▲ = up) and confirm
( ).
5. Select sex (▼ = male, ▲ = female) and
confirm ( ).
) and confirm ( ).
).
).