Receiving the memorised
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band (FM1, FM2, MW or LW).
3
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
If you cannot tune in a preset
station
Push the SEEK/AMS control up or down
momentarily to search for the station
(automatic tuning).
Scanning stops when the unit receives a
station. Push the SEEK/AMS control up or
down repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(SHIFT), then press (3) (PLAY MODE) repeatedly
until "LOCAL" (local seek mode) is displayed. Then
press (4) (n) to select "LOCAL-ON." Press (SHIFT).
Only the stations with relatively strong signals will
be tuned in.
Tip
If you know the frequency of the station you want
to listen to, push the SEEK/AMS control up or
down and hold until the desired frequency
appears (manual tuning).
If FM stereo reception is poor
— Monaural Mode
1
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until "MONO"
appears.
2
Press (4) (n) repeatedly until "MONO-
ON" appears.
The sound improves, but becomes
monaural ("ST" disappears).
3
Press (SHIFT).
To go back to normal mode, select "MONO-
OFF" in step 2 above.
Changing the displayed items
Each time you press (DSPL), the item changes
as follows:
z Frequency
MOTION DISPLAY* Z
* All the items above are scrolled in the display
one by one in order.
z Clock
EN
11