Troubleshooting - Phasak Kryptos Serie Manual Del Usuario

Output Voltage Regulation
Transfer Time
Waveform
Tipe x number
Charging Time 90%
Dimensions - Net Weight
Non-condensing humidity-Temperature
Noise level
*Specifications are subject to change without notice

4. Troubleshooting

4.1 Troubleshooting
Problem
Nothing is displayed on the
panel
The UPS alwais on battery
mode
KRYPTOS
OUTPUT
BATTERY
DIMENSIONS AND WEIGHT
CONDITIONS
0-90% @ 0- 40°C (no condensation)
Possible Cause
The UPS is not on.
Battery voltage is too low.
Battery fault.
Replace the battery.
±10%
2-6 ms
Simulated Sine Wave
12V / 5AH x 1
8 h.
(305 x 158.5 x 95) mm / 2.9 kg.
< 40dB
Solutions
Press the power switch again to
turn on the UPS.
Charge the battery at least 6
hours.
Replace the battery.
Re-plug the power cord.
PH 9478