Setting The Clock Automatically; Other Functions; Using The Rotary Commander - Sony CDX-4180R Manual De Instrucciones

Ocultar thumbs Ver también para CDX-4180R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "CT" appears.
ET
SETUP
2
Press (4) (n) repeatedly until "CT-ON"
appears.
The clock is set.
ET
CT
SETUP
3
Press (SHIFT) to return to the normal
display.
EN
To cancel the CT function
Select "CT-OFF" in step 2 above.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
14
CTOFF
CTON

Other Functions

You can connect an optional rotary
commander (RM-X4S) with this unit.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons (the SOURCE
and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TUNER ˜ CD
Pressing (MODE) changes the operation
in the following ways;
Tuner: FM1 n FM2 n MW n LW
Tip
When the POWER SELECT switch is set to position
B, you can turn on this unit by pressing (SOURCE)
on the rotary commander.
(MODE)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cdx-4180rv

Tabla de contenido