Setting The Clock Automatically; Other Functions; Using The Rotary Commander - Sony XR-C8100R Manual De Instrucciones

Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
Press (SHIFT), then press (3) (SET UP)
repeatedly until "CT" appears.
SET UP
2
Press (5) (n ) repeatedly until "CT on"
appears.
The clock is set.
SET UP
3
EN
Press (SHIFT) to return to the normal
display.
To cancel the CT function
Select "CT off" in step 2 above.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.
18

Other Functions

Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control an optional CD or MD unit
with the rotary commander.
By pressing buttons (the SOURCE
and MODE buttons)
(SOURCE)
Each time you press (SOURCE), the
source changes as follows:
TAPE n TUNER n CD n MD
Pressing (MODE) changes the operation
in the following ways;
• Tape transport direction
• Tuner : FM1 n FM2 n MW n LW
• CD unit : CD1 n CD2 n ...
• MD unit : MD1 n MD2 n ...
Tip
When the POWER SELECT switch is set to position
B , you can turn on this unit by pressing (SOURCE)
on the rotary commander.
(MODE)