Metra 99-5824CH Instrucciones De Instalación página 6

TRANSIT CONNECT 2010-UP
DDIN HEAD UNIT PROVISION
Locate the factory wiring harness in
1
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Cut and remove the center bar from
the radio housing. (Fig. A)
3
Snap the Double DIN brackets to the
inside edge of the Radio Housing.
(Fig. B)
4
Slide the Double DIN head unit
or into the bracket/radio housing
assembly and secure the Double
DIN head unit to the assembly using
the screws supplied with the radio.
(Fig. C)
5
Mount the radio housing assembly
into the sub dash using the supplied
#8 Phillips screws then clip the radio
housing trim panel onto the radio
housing.
99-5824CH KIT ASSEMBLY
A
B
C
4