Jensen MP1524BT Manual Del Propietário página 12

11. Remote Control Sensor
Accepts infrared signals from the remote control.
12. Auxiliary Input Connector
Accepts a 3.5mm jack through which signals from various audio/video devices
can be applied to the unit.
13. USB Port Connector
Allows for the connection of a USB device.
14. USB Interface Connector Cover
Front panel cover which when open allows the connection of a USB device for
playback of audio files.
15. 9 (PTY) Button
Press the PTY button to access the program type related search function.
When the PTY function is enabled, turning the volume knob will display a
category (news, sports, talk, weather, jazz, oldies, country, Top 40, classic rock,
soft rock, public, etc.) Press Next button ( ) to search for radio programming
that contains the desired topic.
16. SCAN # Button
In radio mode, pressing this button will enter the scan mode. The unit will scan
to a higher frequency station and stay on each station for several seconds (the
corresponding frequency will flash 6 times on LCD). In Bluetooth® mode, press
and hold this button to connect or disconnect the mobile phone from the unit.
17. 8 (EQ) (Equalizer) Button
The Equalizer applies preset sound effects to the unit's audio output signal.
Pressing the EQ button allows selection of one of five operating modes: Flat,
Classics, Pop M, Rock M, DSP Off. Pressing and holding this button will activate
the traffic announcement function. The unit will search for radio stations
which contain traffic announcements. TA SEEK will appear on the display.
Press and hold the button again to exit the function.
18. 0 (DISP) Button
Press this button to change the display information. The unit will display radio
station frequencies, current time, and PTY category selection (if any). When
listening to MP3/WMA files, press the button to display disc information such
as: folder, file, song title, artist and album.
19. AS/PS * iPod®-MENU Button
Press and hold to access the Auto-Store Tuning feature which will
automatically scan and enter up to eighteen strong stations into the six preset
memory locations for FM1, FM2 and FM3 and twelve strong stations into the
six preset memory locations for AM1 and AM2. If you have already set the
preset memories to your favorite stations, activating the Auto-Store feature
will erase those stations and enter the new strong stations. This feature is most
useful when travelling in an area where you are not familiar with the local
stations. When listening to WMA/MP3 format files, this button is used it to
search tracks. In Bluetooth mode, use it to input the asterisk (*)icon. In iPod®/
iPhone® mode, press this button to enter the iPod®/iPhone® menu.
10
MP1524BT