MP1524BT
T-MENU
When the unit is paired with a mobile phone briefly pressing the MENU button (7)
will access the telephone menu. Pressing this button or pressing the
or
button (9) will scroll through the menu. The menu items will be displayed in
the following sequence: PRE NUM, RECEIVED, DIALED, MISSED, MANU ANSER,
TALK XX.
PRE NUM
Displays speed dial phone numbers stored in the preset memory. The unit can
store 10 numbers maximum.
NOTE: If unit is reset by pressing the reset button (29), the speed dial numbers
contained in the PRE NUM memory will be erased.
Storing Speed Dial Numbers:
Press the MENU button (7) and select PRE NUM.
1.
2. Use the volume knob (21) to determine which memory preset is available. If
there are no presets stored, EMPTY will appear on the display.
3. Press the volume knob (21) to access the memory preset. DIAL --> will appear
on the display.
4. Use 0~9, *, #, buttons on the unit's front panel to enter the desired telephone
number.
5. When you finish entering the desired number, press the volume knob (21) to
store the number into the preset memory. The LCD will display SAVE OK.
NOTE: In the event a wrong number is entered , briefly pressing the BAND/LOUD
button (4) will clear it. Pressing and holding the BAND/LOUD button (4) will clear
all the numbers.
Making a Speed Dial Call
1.
Press the
2. Press and hold the front number that corresponds to the preset number. The
number stored in the preset will be displayed on LCD.
Preview the Speed List
Press the MENU button (7) to select PRE NUM. If you want to call any number
in speed dial list, use the volume knob (21) to select the speed dial number and
briefly
button (4) to confirm dialing the number.
Edit the Speed Dial List
Select the number you want to edit from the speed dial list, then briefly press
volume knob (21) to enter the edit interface.
RECEIVED
The received menu item displays the last call the mobile phone has received.
Use the volume knob (21) to scroll through the received numbers. As received
calls are displayed you can briefly press the
dialed.
button (4).
button (4) and the number will be
button (8)
27