Product Features; Function Button - HoMedics FRESHFACE Manual De Instrucciones

PRODUCT FEATURES:

The Ionic Facial Sauna provides a deep cleansing facial steam that opens up the pores of the skin to help cleanse impurities and aid make
up removal.
Adjustable Nozzle
Measuring Cup
OPERATING INSTRUCTIONS:
1. Remove the water tank from the Ionic Facial Sauna & unscrew the cap.
2. Fill the provided measuring cup to the indicator level & pour the water into
the water tank.
NOTE: There are min & max level indicators. DO NOT fill cup over the max level
fill line or under the min level fill line. The max level will give approximately 15
minutes of use.
3. Screw the cap back onto the water tank before inserting it back into the Ionic
Facial Sauna.
4. Adjust the nozzle so that it is positioned in the direction of your face.
CAUTION: Your face must be at least 25cm away from the nozzle at all
times during use.
5. Plug into a standard 220-240 V AC plug socket.
6. Press the power button, the LED will illuminate green to show that the Ionic
function is on. To turn the Ionic function off press the power button again, the
LED will illuminate orange.
7. After approximately 1 minute steam will begin to rise. Slowly and gently
position your face in front of the nozzle, ensuring your skin is at least 25cm
away from the nozzle.
CAUTION: Steam will be hot! If you feel discomfort, move your face
away from the facial mask to a comfortable distance. The nozzle will
get hot, DO NOT adjust while the Ionic Facial Sauna is in use.
8. Every few minutes slightly vary the position of your face to provide a more
even sauna, remaining in a static position near the steamer for too long can
cause some discomfort and potential scalding.
9. After use, unplug the unit and drain away any excess water. After unit has
cooled down, clean with a damp cloth. Auto-off will occur if the Ionic Facial
Sauna runs out of water or after 15 minutes of use.
CAUTION: Unplug the unit after use.
NOTE: Ensure that the electrical cord loops below the electrical outlet to form
a 'Drip loop'. This will prevent water from running down the cord into the
electrical outlet.
GB
3 I
Removable Water Tank
Power & Ionic

Function Button