Product Overview; Starting The Trimmer - Toro PowerPlex 51132 Manual Del Usuario

Product Overview

Specifications
Weights
Mass of the machine without
the battery
Mass of the machine with
battery 88525
Mass of the machine with
battery 88526
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
3.2 kg (7.0 lb)
4.2 kg (9.2 lb)
4.8 kg (10.5 lb)
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)
Operation

Starting the Trimmer

1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery pack locks into the latch
1. Battery latch
4. To start the trimmer, press the lock out button,
then squeeze the variable-speed trigger
7).
1. Lock out button
10
Figure 5
(Figure 6).
(Figure
Figure 6
Figure 7
2. Variable-speed trigger
g207326
6).
g189881
(Figure
g189886