Dash Disassembly - Metra 95-6547B Instrucciones De Instalación

1. Remove (3) T20 Torx screws from
the bottom edge of the panel below
the steering column, then unclip and
remove the panel. (Figure A)
2. Remove (2) Phillips screws from the
instrument cluster panel above the
gauges. (Figure A)
3. Remove (3) T20 Torx screws from the
bottom of the steering column shroud,
then unclip and remove just the top half
of the shroud. (Figure A)
4. Unclip the entire dash panel surrounding
the radio, climate controls, and
instrument cluster. Unplug the climate
controls, then remove the panel.
5. Remove (4) Phillips screws securing the
radio, then slide the radio out. Unplug
and remove the radio.
Continue to Kit Preparation
2

DASH DISASSEMBLY

2 Screws
3 Screws
3 Screws
(Figure A)
|
386.257.1187 MetraOnline.com