Disposal Information - Siemens VS08G Serie Instrucciones Para El Uso

en

Disposal information

Packaging
The packaging protects the vacuum clea-
ner from damage during transportation.
It is made of environment-friendly materials
and can be recycled.
Dispose of unneeded packaging at the
appropriate recycling points.
Used vacuum cleaner
Used appliances still contain many recy-
clable materials.
Therefore, take your used appliance to
your retailer or recycling centre so that it
can be recycled.
For current disposal methods, please
enquire at your appliance dealership or
local council.
!
Please note
If a fuse should blow when you switch on
the vacuum cleaner, this may be because
other electrical appliances which have a
high current draw are connected to the
same power circuit.
To avoid the fuse tripping, select the
lowest power setting before switching the
vacuum cleaner on, and increasing the
power only once it is running.
en
Fold out picture pages.
Setting up
Figure 1
a) Insert the suction hose connector into the
suction opening until it engages.
b)To remove the suction hose, press the two
lugs together and pull the hose out.
Figure 2*
a) Connect the handle and the telescopic
tube together.
b)Push the handle into the telescopic tube
until it engages.
To release the connection, press the unlat-
ching sleeve and pull the handle out.
Figure 3*
a) Connect the floor nozzle and the telesco-
pic tube together.
b)Push the telescopic tube into the connec-
ting piece of the floor nozzle until it enga-
ges.
To release the connection, press the unlat-
ching sleeve and pull the telescopic tube
out.
Figure 4*
To adjust the length of the telescopic tube,
press the adjusting button/adjusting sleeve
in the direction of the arrow and adjust the
tube to the required length.
Figure 5
a) Take the mains plug, pull the mains cable
to the required length and insert the plug
in a wall socket.
b)If your unit has an electronically operated
cable reel, the Ready indicator now lights
up green.
Figure 6
To switch your vacuum cleaner on and off,
press the On/Off key in the direction of the
arrow.
Figure 7
Use the suction adjuster to infinitely adjust
the suction to the required level.
Low suction range:
For cleaning delicate fabrics, such as cur-
tains.
Middle suction range:
For daily cleaning of lightly soiled surfaces.
High suction range:
For cleaning durable floor coverings, hard
floors and for heavily soiled surfaces.
Vacuuming
You have bought an extremely powerful
device.
The highest suction setting is therefore only
recommended for heavily soiled, durable car-
peted and hard floors.
Figure
8
Adjusting the floor nozzle:
For cleaning rugs
and carpets =>
For cleaning hard floors =>
Floor nozzle with carpet lifter*
Figure 9*
When you pull the floor nozzle backwards,
the rug is lifted, allowing you to clean
underneath the carpet edge.
* Depending on equipment level