Using The Rinsing Aid And Detergent Dispensers - THOMSON TDW 1445 Manual De Instrucciones

Adjusting salt consumption
1. Enter the status of salt adjustment.
Close the door, press and hold
"H4" is shown on the display.
2. Select a certain level of salt consumption by repeatedly pressing
Salt consumption may vary according to different programmes.
It is recommended to select the level by following the table below.
Water Hardness Level
°dH °fH
0~5 0~9
6~11 10~20
12~17 31~30
18~22 31~40
23~34 41~60
35~45 61~98
NOTE:
1 °dH = 1.25 °Clarke = 1.78 °fH = 0.178 mmol/l
°dH: German degree
°fH : French degree
°Clarke: British degree
USING THE RINSE AID AND DETERGENT DISPENSERS
The rinse aid helps the dishes dry faster and
prevents the formation of scale deposits and
staining. It is automatically added to the
water during the final rinse cycle.
The detergent and rinse aid dispensers are
located on the inner part of the door: the
detergent dispenser is on the left, and the
rinse aid dispenser is on the right.
Adding the rinse aid
within 60 seconds after
°Clarke mmol/l
0~6 0~0.94
7~14 1.0~2.0
15~21 2.1~3.0
22~28 3.1~4.0
29~42 4.1~6.0
43~69 6.1~9.8
is pressed until
.
Display Salt consumption
(gram / cycle)
H1 0
H2 9
H3 12
H4 20
H5 30
H6 60
12