THOMSON TDW 1445 Manual De Instrucciones página 37

Rotate the dispenser cap anticlockwise and remove it.
Add the rinse aid until the container is full. The optical level indicator on the side of the
cap should be completely dark.
Attach the cap and turn it clockwise.
NOTE: Refill the rinse aid when the optical level indicator becomes clear again, or when the
rinse aid warning light comes on.
Adjusting the rinse aid dispenser setting
The factory setting for the dishwasher is 4 and you can
choose between 6 settings.
The amount of rinse aid dispensed is proportional to the
selector position.
1. To adjust the rinse aid setting, remove the dispenser
cap.
2. Use a screwdriver (not supplied) to rotate the rinse
aid selector to the desired position.
3. Attach the cap and turn it clockwise.
NOTE: The amount of rinse aid must be increased if the washed dishes appear dull or
feature circular stains. If the dishes are sticky or have white streaks, it is necessary
to reduce the rinse aid setting.
Adding the detergent
To open the detergent dispenser cap, gently press the release button.
Add the detergent and close the cap carefully.
NOTE: Use only detergent specifically formulated for dishwashers. For optimal washing
results it is important to use a good quality detergent.
A. Detergent for main wash cycle
B. Detergent for pre-wash cycle
13