Insert Battery - LaserLiner TwinFinder Manual De Instrucciones

Read the operating instructions and the enclosed brochure
!
„Guarantee and additional notices" completely. Follow the
instructions they contain. Safely keep these documents for
future reference.
Electronic detector for metal and live conductors.
1 Maximum display
2 LED display
3 Mode LED's:
METAL / CAL / AC
4 LED „Voltage (AC) found"
5 ON/OFF button

Insert battery

1
Open the battery compartment on the housing's rear side and insert
a 9 V battery. Correct polarity must be observed. Refer to the illustra-
tion above.
Operation
2
Switch the device on (Button 5). AutoShutOff: The device will auto-
matically switch itself off about 2 minutes after the last measure-
ment.
06
GB
1
2
3
4
5
6
7
8
9
6 Toggle between scan modes:
Metal search /
AC voltage search
7 Calibration
8 Felt glide pad
9 Battery cover
10 9 V battery (E-Block/
PP3/6LR61)
Backside
10