Instructions, technical data, approvals and more information
at: documentation.ifm.com
English
Product information and safety instructions
Please read the online documentation prior to working on/with the product and
archive it. Ensure that you always use the documentation valid for the product. It is
available on our website at documentation.ifm.com or via the QR code shown.
This product is a subcomponent for integration into a system. The system architect
is responsible for the safety of the system. The system architect undertakes to
perform a risk assessment and to create documentation in accordance with legal
and normative requirements to be provided to the operator and user of the system.
This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised
by the architect of the system.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose (see the chapter Functions and
features).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity.
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany
80304065 / 00
LW2720
08 / 2021
7000006-938, Rev AA
1