CASUALPLAY KODE FIX SAFE TECH Manual De Instrucciones página 17

go through the guides marked in red.
• Fasten the seat belt buckle (fig.9).
• Adjust the headrest so that it is at the correct height, and tighten the seat belt.
WARNING: Make sure that the seat belt is not twisted.
Removing the safety seat
• Unfasten the seat belt.
• Take the abdominal part of the vehicle seat belt out of the guides, and then do the
same with the diagonal part.
• Take the child out of the restraint system.
• If you have used the fix connectors to fasten the safety seat to the vehicle seat, press
the buttons on both sides and release the safety seat (fig.10).
• If you want to leave the safety seat installed in the car, unfasten the seat belt buckle,
take the child out of the seat and then fasten the vehicle seat belt again.
Removing the upholstery
• Take the upholstery off the headrest (fig.11).
• Take the upholstery off the backrest (fig.12).
• Lastly, take the upholstery off the seat (fig.13).
• Follow the same steps in reverse to put the upholstery back on again.
Maintenance
• Clean the plastic parts with mild soap and warm water.
• Wash the upholstery and fabric parts by following the washing instructions indicated on
the different fabric care labels.
15