DURAVIT DuraSystem WD5003 Manual De Uso página 58

Problem
General function
Actuator plate does not work
Button lighting does not work
Button lighting lights up
continuously
Flushing functions
Water runs continuously into
the ceramic
Insufficient flushing of the
ceramic
Potential cause
Power supply has been
interrupted
Cleaning function is activated
Child safety lock is activated
Malfunction
Obstacle within the detection
range, e.g. furniture
Presence detection is
incorrectly set
Malfunction
Software malfunction
Malfunction in the motor
mechanism
Flush volumes are incorrectly
set
Malfunction in the motor
mechanism
Solution
>
Restore the power supply.
>
Buttons appear again
automatically after 2 min.
>
Buttons appear again
automatically after 2 min.
>
Contact help@duravit.com.
>
Remove the obstacle.
>
Switch to presence
detection in special mode
(for small rooms).
>
Contact help@duravit.com.
>
Disconnect the power
supply for 10 sec.
>
Restore the power supply.
>
Contact help@duravit.com.
>
Increase the flush volume.
>
Contact help@duravit.com.
57