Station Firmware Update Via Ingerev Web Manager - Ingeteam INGEREV CITY Duo Manual De Instrucciones

Station firmware update via INGEREV WEB Manager

2. Station firmware update via INGEREV WEB Manager
This update method is valid for all INGEREV charging stations.
In INGEREV WEB Manager, access the Charging Points > serial number > Update menu. Select the file in the
computer's directory where the file with the desired firmware is saved, and select it by pressing on the file two
times. Then press the Flash image button.
A confirmation screen appears. If you really want to update the device's firmware, you must press the Proceed
button. Otherwise return by pressing Cancel.
During the time in which the firmware is being updated, the following message appears: Please, wait a moment.
Once the process has completed, if correct the following message appears: The firmware update was successful. If
an error has occurred, the following message appears: The firmware update was unsuccessful.
In the INGEREV GARAGE Basic and INGEREV CITY Duo stations, as well as the station's firmware, you can update
the bootloader and romfs. To update the bootloader or romfs, follow the previously described steps in the fields
corresponding to these operations.
ABA2025IQM05_ - Firmware update
Ingeteam
EN
ES
FR
IT
7