Osd Menu Control; Basic Settings; Automatic Tuning - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

MYRICA VQ32-1 / MYRICA VQ40-2

OSD Menu Control

The process for making settings in the OSD Menu is described below.
► Press the MENU button to display the Main Menu on the screen.
► With the or button choose a menu option and press the
► Repeat this process until the desired menu option is reached.
Selected menu options are highlighted with a blue bar. Menu options with another sub-menu or that
can be executed directly are indicated with
► With the buttons /
► Press the MENU button to return to the previous menu.
► To close the OSD menu press the red button.
The buttons that you can use are shown in the bottom half of each menu.

Basic settings

Automatic tuning

30 - English
.
choose the desired option or a parameter and press the MENU button.
►
►
►
►
button.
Press the MENU button to open the Main
Menu.
With the or button choose the
Setupmenu and press the
Choose Tuner with the or
press the button.
Choose the menu option Auto. Tuning with
the or button and press the
A26361-K1139-Z120-1-M119, Edition 1
button.
button and
button.