Important Notes; Safety Information - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

Important notes

Here you will find essential safety information that you must be aware of when using your TV set.
Do not allow still images to be displayed for an extended time, e.g. still images from
!
videos, station label etc. (maximum of 1 hour). These pictures may remain visible! Also, do
not allow prolonged operation in a picture mode in which black bars are visible (i.e.
operation in 4:3 picture aspect). These black bars can also remain visible.
This product from Fujitsu Siemens Computers contains intellectual property of third
i
parties. Any tampering with or modification of the product will void the warranty and may
lead to legal prosecution to the full extent of the law.
In this manual "PC" is used to identify sets with the "VGA" PC video interface.
i

Safety information

This device complies with all relevant safety regulations for audio, video and TV
i
equipment.
If you have any questions, contact your sales outlet or our help desk.
● The TV set's flat panel is sensitive to pressure and scratches. You should therefore be careful
with the flat panel so as to avoid lasting damage (Newton rings, scratches).
● If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
● During installation and before operating the device, observe the instructions on environmental
conditions in the Preparations chapter.
● To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept
clear.
● The MYRIVA VQ40-2 automatically sets itself to the correct voltage within the range from 110
V to 240 V. The MYRICA VQ32-1 is designed for 240 V. Make sure that the local mains voltage
is not more or less than this range.
● The device must only be connected to an earthed mains outlet.
● Ensure that the power socket on the device or the earthed mains outlet is easily accessible.
● The ON/OFF switch does not fully disconnect the TV from the mains voltage. To disconnect
fully from the mains supply, remove the power plug from the socket.
● Lay the cables in such a way that they do not create a hazard (danger of tripping) and cannot
be damaged. When connecting the set, observe the relevant notes in the chapter
"Preparation".
● No antenna or data transfer cables should be connected or disconnected during a
thunderstorm.
● Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the
device (danger of electric shock, short circuit).
A26361-K1139-Z120-1-M119, Edition 1
MYRICA VQ32-1 / MYRICA VQ40-2
English - 3