Troubleshooting; No Picture And No Sound Although The Mains Plug Is Plugged In And The Set Switched On; The Screen Is Dark - Fujitsu MYRICA VQ32-1 Instrucciones De Operación

MYRICA VQ32-1 / MYRICA VQ40-2

Troubleshooting

Should an error occur, first check the following points. If the picture fault has not been solved, then
the LCD-TV should be checked using another signal source if possible.
Please contact our help desk if you are unable to solve the problem.
If the tips given on troubleshooting have not worked, switch the set off at the mains and pull
!
the plug from the socket.
Do not try to repair the set yourself and do not remove the set's rear cover in any
circumstances.
No picture and no sound although the mains plug is
plugged in and the set switched on
Cause
Mains switch in "0" position (OFF)
The set's mains plug is not plugged into the
mains socket.
Faulty mains cable.

The screen is dark

Cause
Contrast setting too low.
No input signal, wrong input selected.
50 - English
Troubleshooting
► Set the mains switch to position "I".
► Plug the mains cable into the socket.
► Call our service hotline.
Troubleshooting
► Set the brightness and/or contrast correctly
under the Picture menu option.
► Check the connection cable
► Assign the correct input to the source.
A26361-K1139-Z120-1-M119, Edition 1