Samsung Digimax 130 Guia Del Usuario página 39

SETTING UP THE FUNCTION
Setting up the function by using the LCD monitor
COPY TO CF CARD
Copy the recorded images on the internal memory to CF CARD.
1
Turn the power on.
2
Set the camera to PLAY mode.
3 By pressing the Menu button, the PLAY menu is
displayed on the LCD monitor.
4
Use the Menu select button to select COPY TO CF CARD.
5
Press the Enter button and the cursor will skip to the data field.
6
Use the Menu select button to select data.
When you press the Enter button after selecting YES
[message 1] will be displayed on the LCD monitor and
[message 2] will be displayed after copy has been completed.
Press the Enter button and the cursor will return to
the PLAY menu automatically.
Press the Enter button after selecting NO and the cursor
will return to the PLAY menu automatically.
7
Press the Menu button again to make the PLAY menu disappear.
Note
A NO CARD message will be displayed on the LCD monitor and the camera will make
beep sounds when you press Enter button after selecting YES, should the CF CARD not
have been inserted.
Should this be the case, press the Enter button and turn the power off.
Then insert the CF CARD and repeat 1-6.
LCD BRIGHTNESS
SLIDE SHOW
COPY TO CF CARD
DPOF
MESSAGE
NO CARD
OK
PLAY MENU
YES NO
MESSAGE
PLEASE WAIT
[message 1]
MESSAGE
ALL IMAGE COPIED
OK
[message 2]
39