Play Mode - Samsung Digimax 130 Guia Del Usuario

SETTING UP THE FUNCTION
Setting up the function by using the LCD monitor

PLAY mode

Press the Menu button in PLAY mode, the PLAY menu will be displayed.
LCD BRIGHTNESS
Refer to page 33.
SLIDE SHOW
This displays the recorded images in sequence, with a user-defined delay time in between
2 and 10. The power (battery, or AC power) will continue until the slide show is finished.
After finishing the SLIDE SHOW, the auto power off system will be applied.
If running time of the SLIDE SHOW is over 30 minutes, the auto power off system will be applied.
1
Turn the power on.
2 Set the camera to PLAY mode.
3
By pressing the Menu button, the PLAY menu will be
displayed on the LCD monitor.
4
Use the Menu select button ( / ) to select SLIDE SHOW.
5 Press the Enter button and the cursor will skip to the data
field.
6
Use the Menu select button ( / ) to select data.
The delay is between 2 and 10 seconds in increments of 2 senconds.
The default setting is 2.
PLAY MENU
LCD BRIGHTNESS
SLIDE SHOW
COPY TO CF CARD
DPOF
2
37