Samsung Digimax 130 Guia Del Usuario página 35

SETTING UP THE FUNCTION
Setting up the function by using the LCD monitor
WHITE BALANCE
The color of the image may alter according to lighting conditions during shooting.
By using this function, you will be able to obtain more naturally colored images.
1
Turn the power on.
2
Set the camera to RECORD mode (
3
By pressing the Menu button, the RECORD menu will
be displayed on the LCD monitor.
4
Use the Menu select button ( / ) to select
WHITE BALANCE setting.
5
Press the Enter button and the cursor will skip to the data field.
AUTO
6
Use the Menu select button ( / )to select
WHITE BALANCE setting (Auto, Sun, Shade, Fluorescent, Tungsten).
The default setting is AUTO.
7
Press the Enter button again to make the change.
The cursor returns to the RECORD menu automatically when the change has been made.
8
Press the Menu button again to make the RECORD menu disappear.
This setting is reset to AUTO when the camera power is off.
).
TUNGSTEN
SUN
RECORD MENU
LCD BRIGHTNESS
QUICKVIEW
WHITE BALANCE
EV COMPENSATION
AUTO
FLUORESCENT
SHADE
35