SETTING UP THE FUNCTION
Setting up the function by using the LCD panel
Selecting the Self-timer mode
This function is used when the photographer would also like to be in the picture.
The Self-timer mode can only be set under RECORD mode.
Press the Self-timer button(
1
- The Self-timer lamp(red) is turned on.
2
Press the Shutter button to activate.
3
When you press the Self-timer button, the Self-timer lamp blinks slowly for 7 seconds.
The lamp will blink rapidly for a further 3 seconds before the picture is taken.
Checking the battery
Refer to page 13.
32
) to activate it.