Grundig BL 5040 Manual De Instrucciones página 14

Ocultar thumbs Ver también para BL 5040:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
AT A GLANCE ______________________________
Controls, parts and accessories
See the illustration on page 3.
Controls and parts
Hanging loop
A
Power cord and plug
B
On/Off button, level I
C
On/Off button, level II
D
Base unit
E
Whisk holder
F
OPERATION _______________________________
Preparation
Note
Your Hand Blender has been designed for
small quantities of food and should not be
used for any other application.
1
Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulation.
2
Before using of the appliance for first time,
clean parts which come into contact with food
(See the "Cleaning and care" section).
3
Prepare the food in small pieces before using
the appliance.
Blending
1
Put the food that you would like to puree or
mix in the measuring beaker
other similar bowl.
2
Connect the base unit
putting the blender onto the base unit. Turn
the base unit to the left.
Make sure the blender is properly attached to
the base unit.
3
Insert the plug
into the wall socket.
B
4
Immerse the blender
beaker
, where the ingredients to be
I
blended are.
Note
To prevent the ingredients from splashing, do
not press the On/Off button level I
On/Off button level II
been immersed in the ingredients.
5
Press and hold down the On/Off button level
14 ENGLISH
or in any
I
to the blender
E
G
in the measuring
G
and
C
until the blender has
D
Blender
G
Balloon whisk
H
Measuring beaker
I
Chopper lid
J
Chopping blade
K
Chopping bowl
L
Accessories
Wall mounting attachment
M
2 x screws
2 x dowels
I
.
C
‒ The appliance starts operating.
Notes
Always use the appliance on level I. If
necessary, press and hold down the On/Off
button level II
Off button level I
off automatically.
Do not use the appliance for longer than one
minute at a time.
6
Move the appliance slowly up and down and
in circles to blend the ingredients.
7
Release the On/Off button level I
Off button level II
process and disconnect the power plug from
the socket.
8
Remove the mixture from the measuring
beaker
I
9
Disassemble the blender
by
by turning the base unit to the right and
E
pulling it off.
Notes
Do not overfill the measuring beaker
other similar bowl to prevent the mixture
from overflowing. Smaller amounts can be
processed easier.
If you would like to use the blender directly
in the cooking pot, first take the cooking pot
out off the stove to prevent the blender from
overheating.
Do not operate the appliance continuously
for more than 1 minute, in order to prevent
overheating of the appliance.
Never switch on the appliance for longer as
you need to process the food.
. Once you release the On/
D
, the appliance switches
C
when you finish the
D
.
from the base unit
G
or On/
C
or
I

Publicidad

Tabla de contenido
loading

Tabla de contenido