Suntec Wellness Klimatronic CoolBreeze 12000 TV Manual De Instrucciones página 15

3. Speed: When the appliance is working press this button you can select your
desired wind's speed , it have 3 speeds (low , middle , and high), the LED will display
the related status.
Low
3. Osc: Press this button, you can set the oscillation function, the light of
button will illuminate, the LED will display the related status, press it again, the
appliance will stop oscillation, the related light will shut up.
ON
Oscillation
4. Timer: Press this button, you can set your desired time (1-12hr), and the
button of it will illuminate, the LED will display the relate status.
5. Nature wind and sleeping wind selection: Press this button, you can
select Nature wind or Sleeping wind , the LED will display the related status.
About the remote control:
1. When you use the remote control for the first time, pull out the insulation pad which
is located in the back of the remote.
2. The remote control works within 5m, if the remote does not face to the appliance's
signal receiver, the distance will be short. So the remote should be face to the signal
receiver.
3. Do not put anything between the remote and the signal receiver.
4. If you use the appliance in the room which have some high power appliance is
working, the remote maybe not working.
5. When you do not use the appliance for a long time please take out the battery.
6. Changing the battery as following picture.
Middle
OFF
OFF
Revoke
High
ON
Oscillation