Pantech Crux Guia Del Usuario página 38

3. Enter the 4-digit lock code.
4. Tap Restrictions.
5. Tap one of the following settings to select:
• Location Setting: Unlock Setting/Lock
• Calls: Incoming Calls/Outgoing
Allow All,
For Incoming Calls, set
For Outgoing Calls, set Allow All,
• Messages: Incoming Messages/Outgoing
Allow All
For Incoming Messages, set
For Outgoing Messages, set Allow All
• Dial-Up Modem: Allow/Block
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock mode prevents the unauthorized use of your phone. Once the phone is locked, it
is in restricted mode until the lock code is entered. You can still make emergency calls.
1. Slide the phone up, tap Settings
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Phone Lock Setting.
5. Tap one of the following settings to select:
• Unlocked: Phone is unlocked.
• On Power Up: Phone will be locked when it is turned on.
LOCK PHONE NOW
Allows you to lock your phone immediately.
1. Slide the phone up, tap Settings
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Lock Phone Now.
5. To unlock the phone, enter the 4-digit lock code.
72
Setting.
Calls.
Contacts Only, Block All.
or
Contacts Only, or Block All.
Messages.
Block All.
or
or Block All.
and then tap Phone Settings.
and then tap Phone Settings.
RESTORE PHONE
To delete all user data and restore all settings to their default values:
1. Slide the phone up, tap Settings
2. Tap Security.
3. Enter the 4-digit lock code.
4. Tap Restore Phone.
Yes
5. Tap to confirm.
6. Tap Next.
7. Enter the 4-digit lock code. The phone will turn off and then back on
automatically.
SYSTEM SELECT
You can set your phone to search or roam on another network when you are not in your
home area. Leave this setting as default unless you want to alter the system selection as
instructed by your service provider.
1. Slide the phone up, tap Settings
System Select.
2. Tap
3. Tap one of the following settings to select:
• Automatic: Scans radio channels based on the automatic setting.
Home Only: Network is available only within your home area or home affiliated area.
•
NAM SELECT
Enables Auto NAM (Number Assignment Modules) or selects a NAM manually.
AUTO NAM
Automatically switches the phone to proper NAM when you have multiple NAM
registrations.
1. Slide the phone up, tap Settings
2. Tap NAM Select.
OFF Auto NAM. You will see the indicator slide to ON.
3. Tap next to
and then tap Phone Settings.
and then tap Phone Settings.
and then tap Phone Settings.
01
02
03
04
05
06
07
08
73