Settings - Steren TEL-235 Manual De Instrucciones

4. SETTINGS

1. In-on hook state, press Set. The message Set
1 Date, starts to blink on the screen.
2. Press Set again, the year starts to blink.
Use buttons to set the current year. Press
Set once again.
3. Repeat last step to set month, day, hour and minutes. Press Set to store the
changes.
4. Press SET and
5. Please enter the local area code. Use
Set to store the changes.
6. Use the button until appears Set 3 LCode.
7. Press SET and enter the PABX code. If you are on a PABX and you need to
enter a code to make external calls, set it here. Use the numerical key to enter
the code. Press Set to save your changes.
8. To modify Set 4 Lcd press SET once again and use the
the intensity of screen light. It has 8 levels. Press SET to save changes.
9. Use the button until appears Set 5 FLASH. Using the
between 100, 300, 600 and 1000.
button to modify Set 2 Code.
buttons to enter the code. Press
buttons to level
buttons select
9 9