Russell Hobbs 15066-56 Instrucciones página 4

general
30 Remove the kettle from the stand before pouring.
31 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle.
32 Don't tilt the kettle backwards, water might get on to the control area. If this happens, let the
kettle dry before use – sit it somewhere warm for 12 hours.
33 When you lift the kettle, you may see moisture on the stand. Don't worry – it's the steam
used to switch off automatically, which then condenses and escapes via vents under the
kettle.
34 You may see some discolouration on the floor of the kettle. Again, don't worry – it's due to
the bonding of the element to the kettle floor.
using with insufficient water
35 This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
36 You must then remove the kettle from its stand to reset the cut-out.
37 Sit the kettle on the work surface till it's cold.
care and maintenance
38 Switch the appliance off (2).
39 Unplug the stand from the wall socket, and let the kettle cool down fully before cleaning.
40 Wipe the kettle, inside and out, with a damp cloth.
41 Keep all connectors and sockets dry.
cleaning the filter
42 Check your hands are free from soap, or anything which might leave a taint.
43 Switch the kettle off, and let it cool.
44 Open the lid.
45 Push the top of the filter down and back, into the kettle, to release the hooks on the top of
the filter from the rectangular holes on either side of the spout.
46 Lift the filter out of the kettle, to disengage the bottom hook from the circular hole at the
bottom of the spout.
47 Rinse the filter under a running tap while brushing with a soft brush.
48 Rinse the kettle, in case scale particles have fallen inside.
49 Lower the filter into the kettle, and engage the bottom hook in the circular hole at the
bottom of the spout.
50 Press the top of the filter gently down and towards you, to force the hooks on the top of the
filter into the rectangular holes on either side of the spout.
51 Close the lid.
descale regularly
52 Descale regularly, (at least monthly) to keep your kettle in good working order.
53 Use a descaler suitable for use in plastic products (most products have plastic parts). Follow
the instructions on the descaler, rinse several times, then fill, boil and discard the water, to
ensure no residues are left.
, Products returned under guarantee with faults due to scale will be subject to a repair charge.
wheelie bin symbol
To avoid environmental and health problems due to hazardous substances in
electrical and electronic goods, appliances marked with this symbol mustn't be
disposed of with unsorted municipal waste, but recovered, reused, or recycled.
4