Adjusting The Volume; Turning The Unit Off; Tuner; Basic Operations - Pioneer SUPER TUNER III DEH-P5950IB Manual De Operación

Operating this unit
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

% Use VOLUME to adjust the sound level.

Turning the unit off

% Press SOURCE and hold until the unit
turns off.
All manuals and user guides at all-guides.com

Tuner

Basic Operations

If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 21).
1 Band indicator
2 Preset number indicator
3 LOC indicator
4 Stereo (5) indicator
5 Frequency indicator
1
2
Press BAND until the desired band is dis-
played, FM1, FM2, FM3 for FM or AM.
3
c or d.
4
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Black plate (9,1)
Important
Shows when local seek tuning is on.
Shows when the selected frequency is being
broadcast in stereo.
Press SOURCE to select the tuner.
Press BAND to select a band.
To perform manual tuning, briefly press
To perform seek tuning, press and hold
<XRD7120-A/N>9
Section
02
9
En