Introduction Of Advanced Operations - Pioneer SUPER TUNER III DEH-P5950IB Manual De Operación

Section
03 Available accessories
! If an error message such as ERROR-11 is dis-
played, refer to the multi-CD player owner's
manual.
! If there are no discs in the multi-CD player ma-
gazine, NO DISC is displayed.
Introduction of advanced
operations
You can use COMP/DBE (compression and
DBE) only with a multi-CD player that supports
them.
Function mode 1
% Press FUNCTION repeatedly to switch
between the following functions:
REPEAT (repeat play)—RANDOM (random
play)—SCAN (scan play)—ITS-PLAY (ITS play)
—PAUSE (pause)—COMP/DBE (compression
and DBE)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.
Function mode 2
% Press FUNCTION and hold repeatedly to
switch between the following functions:
TITLE IN (disc title input)—ITS (ITS program-
ming)
# To return to the playback display, press BAND.
Function and operation
REPEAT, RANDOM, SCAN, PAUSE,
COMP/DBE and TITLE IN operations are basi-
cally the same as that of the built-in CD player.
26
En
All manuals and user guides at all-guides.com
Black plate (26,1)
Function name Operation
Refer to Selecting a repeat play
range on page 12.
But the repeat play ranges you can
select are different from that of the
built-in CD player. The repeat play
ranges of the multi-CD player are
REPEAT
as below:
! MCD – Repeat all discs in the
multi-CD player
! TRACK – Repeat just the cur-
rent track
! DISC – Repeat the current disc
Refer to Playing tracks in random
RANDOM
order on page 12.
Refer to Scanning folders and
SCAN
tracks on page 12.
Refer to Using ITS playlists on the
ITS-PLAY
next page.
Refer to Pausing disc playback on
PAUSE
page 12.
Refer to Using compression and
BMX on page 12.
Multi-CD player has DBE (dynamic
bass emphasis) function instead
COMP/DBE
of BMX.
The settings can be switched as
below:
OFF—COMP 1—COMP 2—OFF—
DBE 1—DBE 2
Refer to Using disc title functions
TITLE IN
on page 28.
Refer to Using ITS playlists on the
ITS
next page.
Notes
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat play range
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When playing a CD TEXT disc on a CD TEXT
compatible multi-CD player, you cannot
switch to TITLE IN. The disc title has already
been recorded on a CD TEXT disc.
<XRD7120-A/N>26