Other Functions; Turning The Clock Display On Or Off; Using The Aux Source - Pioneer SUPER TUNER III DEH-P5950IB Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating this unit

Other Functions

Turning the clock display on or off

You can turn the clock display on or off.
! Even when the sources and the feature
demo are off, the clock display appears on
the display.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.

Using the AUX source

This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to AUX1 or AUX2. The
relationship between AUX1 and AUX2
sources is explained below.
About AUX1 and AUX2
You have two methods to connect auxiliary
equipments to this unit.
AUX1 source:
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to AUX1.
AUX2 source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
All manuals and user guides at all-guides.com
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
The allocation of this auxiliary equipment is
automatically set to AUX2.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
% Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 21.
Setting the AUX title
The title displayed for each AUX1 or AUX2
source can be changed.
1
source, press FUNCTION and hold until
TITLE IN appears in the display.
2
built-in CD player.
For details concerning operation, refer to En-
tering disc titles on page 13.
Black plate (23,1)
After you have selected AUX as the
Enter a title in the same way as the
<XRD7120-A/N>23
Section
02
23
En

Publicidad

Tabla de contenido
loading

Tabla de contenido