Initial Settings; Adjusting Initial Settings; Setting The Time - Pioneer SUPER TUNER III DEH-P5450 Manual De Operación

Initial Settings

Adjusting initial settings

Initial settings lets you perform initial set up of
different settings for this unit.
1 display
FUNCTION
Shows the function status.
1 Press and hold until the unit turns
SOURCE
off.
2 Press and hold until
FUNCTION
appears in the display.
3 Press to select one of the initial
FUNCTION
settings.
Press repeatedly to switch between
FUNCTION
the following settings:
— —
TIME FM STEP AM STEP
—
DIMMER FRT+REAR
Use the following instructions to operate each
particular setting.
• To cancel initial settings, press
• You can also cancel initial settings by holding
down until the unit turns off.
FUNCTION
All manuals and user guides at all-guides.com
1
FM STEP
— — —
WARN AUX
.
BAND/ESC

Setting the time

This is used to set the time on the unit's clock
display.
1 Press to select the time.
FUNCTION
Press until the time appears in the
FUNCTION
display.
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
display:
—
HOUR MINUTE
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
Section
07
En 31