Adjusting Treble; Adjusting Loudness; Using Subwoofer Output - Pioneer SUPER TUNER III DEH-P5450 Manual De Operación

Audio Adjustments

Adjusting treble

You can adjust the cut-off frequency and the
Treble level.
In and modes, treble adjustment
FRT1 FRT2
affects only the front output: rear output cannot
be adjusted.
1 Press to select
AUDIO
Press until appears in the display.
AUDIO TRE
2 Select the desired frequency with 2/3.
Press 2 or 3 until the desired frequency
appears in the display.
— — — (Hz)
2K 4K 6K 10K
3 Press 5 or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases
the treble level. – displayed as the level is
+6 –6
increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press to select
AUDIO
Press until
AUDIO LOUD
2 Press 5 to turn loudness on.
Loudness level (e.g.,
LOUD :MID
display.
3 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)— (mid)—
LOW MID
4 Press ∞ to turn loudness off.
appears in the display.
LOUD :OFF
All manuals and user guides at all-guides.com
.
TRE
.
LOUD
appears in the display.
) appears in the
(high)
HI

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to the rear output, first,
switch the rear output setting to subwoofer,
then turn the subwoofer output on. For more
details, see Switching the rear output setting on
page 33.
1 Press to select
AUDIO
When the rear output setting is subwoofer, you
can select . Press
SUB.W
appears in the display.
2 Press 5 to turn subwoofer output on.
appears in the display. Subwoofer
SUB.W :ON
output is now on.
3 Press ∞ to turn subwoofer output off.
appears in the display. Subwoofer
SUB.W :OFF
output is now off.
.
SUB.W
until
AUDIO SUB.W
En
Section
06
29