Built-In Cd Player; Playing A Cd - Pioneer SUPER TUNER III DEH-P5450 Manual De Operación

Built-in CD Player

Playing a CD

1
These are the basic steps necessary to play a
CD with your built-in CD player. More advanced
CD operation is explained starting on page 14.
1 indicator
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
1 Press
OPEN to open the front panel.
CD loading slot appears.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
button
CD EJECT
• You can eject a CD by pressing
3 Close the front panel.
• After a CD has been inserted, press
to select the built-in CD player.
All manuals and user guides at all-guides.com
2
.
CD EJECT
SOURCE
4 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, press
and hold 2 or 3 .
6 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• The built-in CD player plays one, standard,
12-cm or 8-cm (single) CD at a time. Do not
use an adapter when playing 8-cm CDs.
• Do not insert anything other than a CD into
the CD loading slot.
• If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press to eject the disc, and check
CD EJECT
the disc for damage before inserting the disc
again.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in
CD player error messages on page 36.
• The Built-in CD player is not equipped with CD
TEXT function.
• A CD TEXT disc is a CD featuring recorded text
information such as Disc Title, Artist Name
and Track Title.
Section
04
may
ERROR-14
En 13