Protecting The Environment - Stanley FATMAX KFFMEW440 Manual De Instrucciones

Regularly check the condition of the sanding sheet.
u
Replace when necessary.
Always sand with the grain of the wood.
u
When sanding new layers of paint before applying another
u
layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
u
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine
grit for a smooth finish.
Consult your retailer for more information on available
u
accessories.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
Regularly clean the ventilation slots in your tool using a
u
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
(Original instructions)
Technical data
Input voltage
V
ac
Power input W
Orbits (no load)
min
Sanding base surface
mm
Weight kg
L (sound pressure) 86 dB(A), Uncertainty (K) 3 dB(A)
pA
L (sound power) 97 dB(A), Uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
EC declaration of conformity
%
MACHINERY DIRECTIVE
KFFMEW440 Sander
Stanley Europe declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 60745-1:2009 +A1:2010, EN 60745-2-4
+A11:2011
These products also comply with Directive
2004/108/EC and 2011/65/EU. For more information, please
contact Stanley Europe at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Stanley Europe.
Stanley Fat Max Europe, 210 Bath Road, Slough,
ENGLISH
KFFMEW440
(Type 1)
230
480
4,000 - 12,000
-1
Ø 125
2.47
2
) 6.94 m/s , uncertainty (K) 1.5 m/s
h
R. Laverick
Engineering Manager
Berkshire, SL1 3YD
United Kingdom
21/08/2015
2
:
2009
7