Warning Signals - Saeco Dually Manual De Instrucciones

11.2

Warning signals

This chapter describes all the warning messages that the machine may display to the user and the actions that can and/or
must be performed by the user.
Messages often come with symbolic images, in order to facilitate their understanding.
Sometimes the warning messages are just an image.
NB: (*) indicates that the message may affect either side of the machine.
Note: (**) indicates for the water NW version only
Warning signals
Refill water tank Fill the water tank with fresh drinking water.
Err Flowmeter 1 Group flowmeter error.
Err Flowmeter 2 The sensor does not read enough pulses.
Perform a power OFF/ON to try to unblock the water circuit.
If the message persists please contact the customer support.
Error temp. Probe2 Boiler temperature sensor error group 2.
Error temp. Probe1 Boiler temperature sensor error group 1.
H2O Probe Error Water boiler temperature sensor error.
Pressure Sensor Err Pressure probe error.
Slow heating of group 2 boiler.
Heating TimeOut 2
Perform a power OFF / ON to reset the error.
If the message persists please contact the customer support.
Heating TimeOut 1 Slow heating of group 1 boiler.
Perform a power OFF / ON to reset the error.
If the message persists please contact the customer support.
Slow heating for water boiler.
TimeOut Heating H2O
Perform a power OFF / ON to reset the error.
If the message persists please contact the customer support.
Steam boiler filling error.
TimeOut filling H2O
Water boiler does not fill up.
Perform a power OFF / ON to reset the error.
Remove Coffee capsule Empty the right/left capsule drawer.
INSERT BIN Insert the left/right drip tray and capsule drawer into place.
Overheating protection.
OVER HEATING
Wait for the temperature to restore.
The right (2)/left (1) capsule drawer is reaching the maximum capacity of used
capsules.
The message is displayed 5 capsules before the shutdown.
Empty the capsule drawer asap.
Washing in progress. The machine is performing the rinse cycle.
Do not remove the Wait until the machine has completed the cycle.
water tank
The exclamation mark on the menu icon indicates an alarm.
For details enter the menu and view the notification area.
The machine requires a descaling cycle.
Contact the service provider.
How to reset the function
English
NOTE
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
127