Preparing The Coffee - LAVAZZA Jolie & mill Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 115
EN
IT
ESPRESSO DELIVERY
Make sure that the switch-on/supply buttons lights up to
a steady white light.
Never put fingers or objects in the capsule-holder.
Only Lavazza
must be introduced in the capsule-holder.
Single-dose capsules are prepared to dispense one
coffee/product. DO NOT use the capsules more
than once. Inserting two or more capsules can cause
the machine to malfunction.
Place the cup under the coffee dispenser for a classic
espresso.

PREPARING THE COFFEE

or compatible capsules
Remove the drip tray to use cups of different sizes for
a long coffee.
If power supply is interrupted during the coffee supply
cycle, restore power supply and restart the coffee supply
procedure.
If during the supply cycle, water lacks in the tank, water
lack will be indicated by white steady LED on the selected
button, while the LED on the other button will start flash-
ing, then proceed as follows:
- Fill the water tank up to the MAX level indicated.
- Press the power-on/supply button previously selected.
The button will start flashing and the coffee supply pro-
cedure will restart.
After 5 supplies the switch-on/supply buttons start
blinking fast with white light to indicate that the capsules
drawer is filled. Empty the capsules drawer and press one
of the buttons to reset the machine. Now the machine is
ready for a new supply.
40

Publicidad

Tabla de contenido
loading

Tabla de contenido