Coffee Dose Programming - LAVAZZA Jolie & mill Instrucciones De Uso

EN I T

COFFEE DOSE PROGRAMMING

Measures are always programmed using the same button;
any other buttons are ignored. The programmed amount
of brewed coffee can be changed by repeating the pro-
gramming.
Lift the pod loading lever until it locks into position to
open the pod fitting compartment.
Put a Lavazza
fitting compartment.
Lower the pod loading lever to close the pod fitting
compartment.
PROGRAMMING THE MACCHINE
capsule into the capsule
Press and hold one of the two coffee delivery buttons
for at least 3 seconds. The selected key will flash and
the coffee machine will enter the programming mode.
Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
If the programmed measure exceeds the maximum al-
lowed (250 cc) the machine will automatically stop deliv-
ery, the delivery button will blink and the last pro-
grammed measure will be saved in the memory. If there
is a power failure during programming, the last pro-
grammed value remains in the memory. If during a dose
programming, water lack is indicated, the machine stops
the supply and the dose being programmed won't be
saved. Once filled the water tank, repeat the dose pro-
gramming procedure.
42