Black and Decker BL2018ST Manual Del Usuario página 5

State of charge indicator
The battery is fitted with a state of charge indicator. This can
be used to display the current level of charge in the battery
during use and during charging.
Press the state of charge indicator button.
u
Leaving the battery in the charger
The charger and battery pack can be left connected with the
LED glowing indefinitely. The charger will keep the battery
pack fresh and fully charged.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too cold,
it automatically starts a Hot/Cold Pack Delay, suspending
charging until the battery has reached an appropriate
temperature. The charger then automatically switches to the
pack charging mode. This feature ensures maximum battery
life.
Functionality
This battery pack is capable of connecting with mobile devices
that support Bluetooth Smart (or Bluetooth
®
To see if your mobile device is compatible, visit: http://www.
bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx
BLACK+DECKER SMARTECH
your smart device (such as a smart phone or tablet) that can
connect and control BLACK+DECKER SMARTECH
products that are specifically marked with the Bluetooth
Smart logo*.
Getting started with SMARTECH
Note: The SMARTECH App is governed by separate terms
TM
and conditions available for viewing through the mobile
application.
Download the BLACK+DECKER SMARTECH
u
application at:
Follow the instructions in the app to create your
u
SMARTECH account.
TM
Connect your battery pack with the BLACK+DECKER
u
SMARTECH app by going to the Home screen and
TM
select 'Add Tool'. You will then be prompted to press and
hold the USB on/off button (1) for 5 seconds, or until it
beeps three times, to activate the pairing process.
Once the connection is established, you will be prompted
u
to give the product an individual name as well as confirm
that you would like to register the product on your
blackanddecker.com account.
4.0) technology.
®
is an optional application for
TM
TM
®
TM
TM
(Original instructions)
For more information on BLACK+DECKER SMARTECH
functionality and features, please visit www.blackanddecker.
com or view the FAQ page and help screens located inside
the mobile application.
USB power port
The BL2018ST Bluetooth battery is equipped with a USB
®
type A power port (2). It delivers up to 1 amp total current.
Make sure battery is charged.
u
Insert a USB plug into USB power port to supply power
u
or charge your device.
Press the USB button (1) or turn the USB on through the
u
SMARTECH app.
TM
*The Bluetooth word mark and logos are registered
®
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by BLACK+DECKER is under license. Other
trademarks and trade names are those of their respective
owners.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots using a soft brush or
u
dry cloth.
Regularly clean the housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Mains plug replacement
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
ENGLISH
TM
5