Safety Information; Disposal Instructions - Forch 6600 6283 Manual De Instrucciones

Steel collets:
■
Switch the machine off.
■ Press the locking button or hold the drill chuck holder.
■
Then screw the cap nut off the spindle by turning counter-clockwise.
■
Insert shank of the accessory deep enough into the steel collets.
■ Insert the steel collets with the corresponding accessory into the spindle and secure with
the cap nut.

Safety information:

■
Please wear safety goggles when working with the drill.
■
Children must only be allowed to work with the device when under adult supervision.
■ Never leave the chuck key after inserting the accessory tool in the chuck.
Useful tips:
■ After a certain continuous operating time the machines become warm.
■
You should then turn them off for a while and let them cool down.
■
The motors do not need maintenance, but the drill chucks, the steel collets and the
spindles should be lubricated from time to time.
■
To achieve centric drilling, it is necessary to fix the drill in the centre of the drill chuck
perpendicularly. It might be necessary to try several times before the drill is well centred.
■
Never apply too much pressure onto the insert tools (accessory tools) as this could lead
to damages to ball bearings or spindles and may affect the precision.
Electric power sources:
■
This drill must only be used with the supplied cigarette lighter cable.
■ Optional: Trafo 12V/230V, item number 6600 6285

Disposal instructions:

Electrical and electronic equipment must not be disposed of with household
waste according to the European WEEE Directive. Their components must be
separately recycled or disposed of because toxic and hazardous components
can be detrimental to health and environment in case of improper disposal.
As consumers, you are obliged according to the Electrical Law (ElektroG) to
bring back electrical and electronic appliances – disposal is free of charge - at the end of
their life time to the manufacturer, to the point of sale or to public collection points provided
for this purpose.
Details are governed by the respective national law. The symbol on the product,
the operating instructions or / and the packaging are an indication of these legal
requirements. You contribute in an important way to the protection of our environment by
this kind of material separation, recycling and disposal of old equipment.