Ce Declaration Of Conformity - Nice ROAD 400 Instrucciones Y Advertencias Para El Usuario

Declaration in accordance with the following Directives: 1999/5/EC (R&TTE), 2004/108/EC (EMC);
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. headquarters
and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been re-edited for edito-
rial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso), Italy.
Number: 297/ROAD400
Manufacturer's Name: Nice s.p.a.
Address: Via Pezza Alta 13, – 31046 Rustignè di Oderzo (TV) Italy
Person authorized to draw up technical documentation: Nice s.p.a.
Type of product: ROAD400 electromechanical gearmotor with incorporated control unit
Model / Type: ROAD400
Accessories: no accessory
The undersigned Mauro Sordini, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above
complies with the provisions of the following directives:
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecom-
munications terminal equipment and the mutual recognition of their conformity, in accordance with the following harmonised standards:
- Health and safety (art. 3(1)(a)): EN 62479:2010
- Electrical safety (art. 3(1)(a)): EN 60950-1:2006 + A11:2009 + A12:2011 + A1:2010 + A2:2013
- Electromagnetic compatibility (art. 3(1)(b)): EN 301 489-1 V1.9.2:2011; EN 301 489-3 V1.6.1:2013
- Radio spectrum (Art. 3(3)): EN 300 220-2 V2.4.1:2010
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of
the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with follow-
ing harmonised standards: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
In addition, the product conforms to the following directive in accordance with the provisions applicable to partly completed machinery:
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending directive
95/16/EC (consolidated text).
– I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC
and that the following essential requirements have been fulfilled: 1.1 - 1.1.2 - 1.1.3 - 1.2.1 - 1.2.6 - 1.5.1 - 1.5.2 - 1.5.5 - 1.5.6 - 1.5.7
- 1.5.8 - 1.5.10 - 1.5.11
– The manufacturer agrees to send the national authorities pertinent information on the partly completed machinery, in response to a mo-
tivated request, without affecting its intellectual property rights.
– If the partly completed machinery is operated in a European country with an official language other than the language used in this dec-
laration, the importer must include a translation with this declaration.
– The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to
the provisions of Directive 2006/42/EC, if applicable.
The product also complies with the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 +
A14:2010 + A15:2011; EN 60335-2-103:2003 + A11:2009
The parts of the product which are subject to the following standards comply with them: EN13241-1:2003 + A1:2011; EN12445:2002;
EN12453:2002; EN12978:2003 + A1:2009
Oderzo, 30 April 2015
IX

CE declaration of conformity

2006/42/EC (MD) annex II, part B
Revision: 6 Language: EN
Mr. Mauro Sordini
(Chief Executive Officer)