Product Safety Information; Product Specifications - Ingersoll Rand 7RALC1 Especificaciones Del Producto

Product Safety Information

Intended Use:
These tools are designed to install or remove threaded fasteners.
● Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
● Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
● If a tool stalls the full torque capacity of the tool will be applied to the operator's hands,
unless a suspension arm or reaction bar is used. This force may cause serious personal
injury from crushing, pinching, loss of balance or loss of control of the tool.
For additional information refer to Product Safety Information Manual Form 04585006.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Model Style
Reversible
7RALC
pistol
Reversible
7RALC3
pistol
Reversible
7RAMC1
pistol
Reversible
7RAMC3
pistol
Reversible
7RLLC1
lever
Reversible
7RLMC1
lever
Reversible
7RAMP1
pistol
Reversible
7RANP1
pistol
Reversible
7RALD1
pistol
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
80167299_ed2
WARNING
Recommended
Torque Range
Clutch
(soft draw)
in-lbs (Nm)
Adjustable
15-75 (1.7-8.5)
cushion
Adjustable
15-75 (1.7-8.5)
cushion
Adjustable
20-110 (2.3-12.5)
cushion
Adjustable
20-110 (2.3-12.5)
cushion
Adjustable
15-75 (1.7-7.4)
cushion
Adjustable
20-110 (2.3-12.5)
cushion
Positive 63 (7.2) @ 50 psi
jaw 115 (13.1) @ 90 psi
Positive 91 (10.3) @ 50 psi
jaw 165 (18.8) @ 90 psi
Direct 39 (4.4) @ 50 psi
drive 70 (8.0) @ 90 psi
WARNING
Sound Level dB(A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
80.9 91.9
EN
Vibration
Level
(ISO28927)
) m/s
2
w
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
EN-1