Technical Data - Milwaukee M18 HOSALC Manual Original

TECHNICAL DATA

BATTERY LAMP
Lighting time with one fully charged battery (8,0 Ah)
Mode 3 High Level ..............................................................
Mode 2 Med Level ..............................................................
Mode 1 Low Level ..............................................................
Luminous flux
High Level ...........................................................................
Med Level ...........................................................................
Low Level ...........................................................................
Colour rendering index (CRI).................................................
Colour temperature................................................................
AC-Mode
Voltage ................................................................................
AC Input ..............................................................................
Rated Power Input ..............................................................
Charger rated power input ..................................................
Charger output ....................................................................
Quick charge current ..........................................................
DC-Mode
Rated Power Input ..............................................................
Battery voltage ....................................................................
USB Output ...........................................................................
Weight without battery ...........................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah ...12.0 Ah)
Protection class .....................................................................
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
Warning: Do not direct the light beam at persons or
animals and do not stare into the light beam yourself (not
even from a distance). Staring into the light beam may
result in serious injury or vision loss.
Caution – this product is provided with cooling openings in
the bottom enclosure. Only install this luminaire on a
surface that will not allow accumulation of water into the
housing. Keep the product away from puddles,etc.
CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects
(short circuit risk).
Battery Cat. DC Volts Capacity Cell No.
No.
M18B 18 ≤ 1.5 Ah
M18B2 18 ≤ 2.0 Ah
M18BX 18 ≤ 3.0 Ah 2 x 5
M18B4 18 ≤ 4.0 Ah 2 x 5
M18B5.5.5 18 ≤ 5.0 Ah 2 x 5
M18B6 18 ≤ 6.0 Ah 2 x 5
M18B9 18 ≤ 9.0 Ah 3 x 5
M18HB3 18 ≤ 3.0 Ah
M18HB4 18 ≤ 4.0 Ah
M18HB5.5 18 ≤ 5.5 Ah 2 x 5
M18HB8 18 ≤ 8.0 Ah 2 x 5
M18HB12 18 ≤ 12.0 Ah 3 x 5
Do not try to charge non-rechargeable batteries with this
charger.
No metal parts must be allowed to enter the battery section
of the charger (short circuit risk).
Never break open battery packs and chargers and store
only in dry rooms. Keep dry at all times.
22 ENGLISH
М18 HOSALC
........................................3,5 h
...........................................5 h
.........................................10 h
.....................................6000 lm / 3,5Hrs
.....................................4000 lm / 5Hrs
.....................................1700 lm / 10Hrs
.........................................80
.....................................4000 K
................................100-240 V
.......EU: 220-240 V, UK: 110 V
.......................................150 W
.........................................70 W
.........................................18 V
........................................3,1 A
.........................................80 W
.........................................18 V
............................ 5,0 V / 2,1 A
........................................9,6 kg
.......................... 10,0 ... 11,0 kg
......................................... IP 34
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new
one.
Before use check machine, cable, and plug for any
damages or material fatigue. Repairs should only be
carried out by authorised Service Agents.
This appliance is not intended to
be used or cleaned by persons
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless
they have been given instructions
concerning the safe use of the
appliance by a person legally
responsible for their safety. They
should be supervised whilst using
5
the appliance. Children shall not
5
use, clean or play with this
appliance, which when not in use
should be secured out of their
reach.
5
Warning! To reduce the risk of fire, personal injury, and
5
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., can cause a short circuit.
ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the
appliance.
Do not dispose of used battery packs in the household
refuse or by burning them. Milwaukee Distributors offer to
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects
(short circuit risk).
Use only compatible Milwaukee chargers from the same
battery platform for charging battery packs. Do not use
battery packs from other systems.
Battery acid may leak from damaged batteries under
extreme load or extreme temperatures. In case of contact
with battery acid wash it off immediately with soap and
water. In case of eye contact rinse thoroughly for at least
10 minutes and immediately seek medical attention.
Warning! To reduce the risk of fire, personal injury, and
product damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach or
bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The area light is intendend to be used light independent
use away from mains supply.
Additionally the charger can charge the specified
Milwaukee battery packs.
Do not use this product in any other way as stated for
normal use.
CHARGING TIME
Battery Cat. No. Volts Capacity Charging Time
max.
M18B 18 ≤ 1.5 Ah 30 min
40 min
M18B2 18 ≤ 2.0 Ah
60 min
M18BX 18 ≤ 3.0 Ah
80 min
M18B4 18 ≤ 4.0 Ah
100 min
M18B5.5.5 18 ≤ 5.0 Ah
120 min
M18B6 18 ≤ 6.0 Ah
M18B9 18 ≤ 9.0 Ah 180 min
M18HB3 18 ≤ 3.0 Ah 40 min
40 min
M18HB4 18 ≤ 4.0 Ah
90 min
M18HB5.5 18 ≤ 5.5 Ah
130 min
M18HB8 18 ≤ 8.0 Ah
210 min
M18HB12 18 ≤ 12.0 Ah
CHARGING
After inserting the battery into the reception of the charger
the battery will automatically be charged (red lamp is
illuminated continuously)
When a hot or cold battery pack is inserted into the charger
(flashing red lamp), charging will begin automatically once
the battery reaches the correct charging temperature
(0°C...60°C).
Charging time varies depending on the battery
temperature, charge needed and the type of battery pack
being charged.
As soon as charging is completed, the charger switches
over to "trickle" charge to maintain the full capacity (green
control lamp is illuminated continuously, red lamp off)
If both LEDs flash at the same time, either the battery has
not been completely mounted or there is a fault in the
battery or the charger. For safety reasons you must stop
using the charger and battery immediately and have them
inspected by an Milwaukee Customer Service Centre.
BATTERIES
Battery packs which have not been used for some time
should be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure
to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept
clean.
For an optimum life-time, the battery packs have to be fully
charged, after used.
To obtain the longest possible battery life remove the
battery pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below
27°C and away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in
accordance with local, national and international provisions
and regulations.
• The user can transport the batteries by road without
further requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations.
Transport preparation and transport are exclusively to be
carried out by appropriately trained persons and the
process has to be accompanied by corresponding
experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement
within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
For type Y attachments:
If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or similar qualified
person in order to avoid a hazard.
Caution! Risk of electric shock.
The light source contained in this luminaire shall only be
replaced by the manufacturer or his service agent or a
similar qualified person.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the machine type printed as well as the
six-digit No. on the label and order the drawing at your
local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
ENGLISH 23