Measuring Functions; Measuring Single Distance; Permament / Minimum-Maximum Measuring; Add / Subtract - DeWalt DW03101 Manual Del Usuario

Measuring Functions

Measuring single distance

1 2
Aim active laser at target.

Permament / Minimum-Maximum measuring

1 2
2 sec
Used to measure room diagonals (maximum val-
ues) or horizontal distance (minimum values)

Add / Subtract

1 2
The next meas-
urement is added
7.332
to the previous
one.
3
min. max.
3
The next meas-
urement is sub-
tracted from the
previous one.
Dewalt DW03101
8.532
The minimum and maximum dis-
tance measured is displayed
(min, max.). The last value meas-
ured is displayed in the main line.
8.532
5.5I5
I2.847
Target surfaces: Measuring
errors can occur when meas-
uring to colourless liquids,
glass, styrofoam or semi-per-
meable surfaces or when
aiming at high gloss surfac-
es. Against dark surfaces the
measuring time increases.
3
Stops permanent / minimum-
maximum measuring.
The result is shown in the
main line and the measured
value above. This process
can be repeated as required.
The same process can be
used for adding or subtracting
areas or volumes.
EN
7