Servicing Of Double Insulated Appliances; Specific Safety Rules - Makita UB1100 Manual De Instrucciones

SERVICING OF DOUBLE
INSULATED APPLIANCES
In a double-insulated appliance, two systems of
insulation are provided instead of grounding. No
grounding means is provided on a double-insulated
appliance, nor should a means for grounding be
added to the appliance. Servicing a double-insulated
appliance requires extreme care and knowledge of
the system, and should be done only by qualified
service personnel.
double-insulated appliance must be identical to the
parts they replace. A double-insulated appliance is
marked with the words "DOUBLE INSULATION" or
"DOUBLE INSULATED," The symbol (square within
a square) may also be marked on the appliance.
SAVE THESE INSTRUCTIONS.
Ampere Rating
More Than
0
6
10
12
000173

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to blower safety rules. If you use this tool unsafely
or incorrectly, you can suffer serious personal
injury.
1. Always use protective goggles, a cap and
mask when using the blower. Ordinary eye or
sun glasses are NOT safety glasses.
2. Never point the nozzle at anyone in the vicinity
when using the blower.
3. Always use the dust bag when collecting dust,
chips and the like.
4. Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and
the like.
5. Never block suction inlet and/or blower outlet.
Increased motor
dangerous fan breakage.
Replacement parts
Table 1: Minimum gage for cord
Not More Than
6
10
12
16
revolution may
VOLTAGE
appliance to a power source (receptacle, outlet, etc.)
be sure the voltage supplied is the same as that
specified on the nameplate of the appliance. A
power source with voltage greater than that
specified for the appliance can result in SERIOUS
INJURY to the user - as well as damage to the
appliance. If in doubt, DO NOT PLUG IN THE
APPLIANCE. Using a power source with voltage less
than the nameplate rating is harmful to the motor.
USE PROPER EXTENSION CORD. Make sure your
for a
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An
undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. Table 1
shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use
the next heavier gage. The smaller the gage number,
the heavier the cord.
Volts
120 V 25 ft.
18
18
16
14
USB017-2
6. The blower is not intended for use by young
children
supervision.
7. Young children should be supervised to
ensure that they do not play with the blower.
8. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
This appliance is intended for household use.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
cause
3
WARNING: Before
Total length of cord in feet
50 ft. 100 ft.
AWG
16 16
16 14
16 14
12 Not Recommended
or infirm
connecting the
150 ft.
14
12
12
persons without