Cosatto nitty gritty port Berlin Manual Del Usuario página 8

Handle 8-
9-
Hood 10-
11-
12-
13-
Softgoods
14-
15-
Tighten the harness 4
Check satisfactory chest pad position
Adjusting:
Handle positions:
(1) In car position (2) Stow position (3) Steady position
Opening:
Closing:
Removing:
Refitting is a reversal of this procedure.
Removing fabric:
Refitting is a reversal of this procedure.
Removing:
Remove hood 12 .
Loosen the harness (1).
Disconnect shoulder straps from harness connector (2).
Pull shoulder straps out of seat (3).
Push crotch strap clip through seat (4).
Unhook the elastic straps under the side of the seat (5).
Unhook the elastic straps under the front of the seat (6).
Pull seat cover from around the front of seat and release button
(7).
Lift cover to access waist strap clips (1).
Remove retaining clip (2). Push strap ends through slots in seat
(3 & 4).
Remove harness and seat liners (5).
Unhook elastic straps behind handle hinges (6).
Work around the edge of the child car seat until the cover can be
pulled clear.
Refitting is a reversal of this procedure.
Note: Never remove the backing foam from the child car seat.